Product working principle and use:
The plunger gate valve is composed of valve body, valve cover, valve stem, plunger, guide sleeve, sealing ring, handwheel and other parts (as shown). When the handwheel rotates, the plunger is driven by the valve stem to move up and down in the guide sleeve, so that the inclined cone of the plunger end and the seat surface complete the valve opening and closing function.
Product structure features:
In the valve plunger and sealing ring with interference fit, by adjusting the flange bolt preload, so that the sealing ring compression produced by the side force and the valve body hole surface and plunger outer circle seal so that high wear-resistant non-toxic new sealing material, so the seal is reliable, durable, thereby improving the service life of the valve.
The plunger gate valve is designed and manufactured according to the original gate valve connection size. Due to the defects of external leakage, poor refolding of sealing ring and short service life, the plunger gate valve combines the advantages of no leakage of the plunger valve with the characteristics of fast opening and closing of the gate valve and high temperature and high pressure resistance, becoming a novel structure of no leakage plunger gate valve.
Product performance parameters:
Experimental project
Experimental medium
Experimental pressure
Pressure test
water
1.5 the PN
High pressure seal test
water
1.1 the PN
Low pressure gas seal test
gas
0.5 – o. 7 mpa
Product main parts materials:
Valve body
Cast steel, cast iron, stainless steel, molybdenum stainless steel
Valve stem
ASTM A182-Gr.F6a ASTM A182-F22 ASTM A351-CF8,CF8M,CF3,CF3M
plunger
Chrome-nickel-titanium stainless steel
bearing
GCR15, 440,304,316
Hole frame
Stainless steel
nut
Orichalcum
Seal ring
Flexible graphite
Shank cap
plastic
Upper cover
CF8M,CF3,CF3M
Hand wheel
ASTM A536 Gr.60-40-18, A216-WCB
